PEDESTAL MOUNT

Pedestal pole adjusts the

center of fan from 52" to 82" and

bolts to 27"

steel dome base with

five carriage bolts.

Meets OSHA Standards 

EIGHT FACTORY ASSEMBLED & TESTED FAN

 HEADS THAT CAN BE USED

WITH ANY OF THE SIX TPI INDUSTRIAL MOUNTS

Printable Catalog (126 kb)

• Use to cool employees on assembly lines or in clustered workstations.

•  Use to cool machinery and to direct heat and fumes away from employee work areas.

• Use to move air from one area or room to another.

OPTIONAL PEDESTAL

WHEEL KIT

with 10" RUBBER

WHEELS

SUSPENSION

MOUNT

POLE MOUNT

Pole mount attaches to 4", 6" or 8" with

U-bolts. (U-bolts not supplied)

WALL MOUNT

I-BEAM MOUNT

I-beam mount &

ceiling mount requires

1 1/2" or longer pipe

 nipple for assembly. (not supplied)

CEILING MOUNT

Oscillating model oscillates in a 90º arc

or can be locked in a fixed position.

Metal gears in the oscillating mechanism allow the

fan to operate at a maximum 30º downward tilt.

  SIZE...............................24" & 30"    

  MOTOR........................2-speed, 120V, 1 Ph., ball bearing, totally   

                    enclosed permanently lubricated permanently

                    split capacitor.

  SWITCH.......................Pull Chain.

  CORD............................SJT type 3 conductor, 12' long.

  GUARDS.......................Double locking, chrome plated steel.

  BLADE..........................Steel hub/spider & aluminum paddles.

 

ACM-TRK

Optional Wheel Kit

4 lbs Shipping Weight

Note: Oscillating motors can only be used with mounts shown when motor can be mounted in the upright position.

VISIT OUR BRAND NEW WEBSITE at WWW.AIRDISTRIBUTOR.NET